Product Searches
|
 |
 |
|
|
|
|
 MCX connectors conform to the European CECC 22220 spec and were introduced
in the 1980’s. While the MCX uses identical inner contact and
insulator dimensions as the SMB, the outer diameter of the plug is
.140 inches, which is 30% smaller than the SMB. This series provides
designers with options where weight and physical space are limited.
MCX provides broadband capability though 6 GHz with a snap-on connector
design. A range of connectors are available , including printed circuit
board and cable connectors.
| • |
Broadband performance
with low reflection DC to 6 GHz. Low cost combined with high
quality. |
| • |
Quick connect/disconnect
snap-on mating reduces installation time. |
| • |
Accommodates a wide
range of miniature RG flexible coaxial cables, including semi-rigid
cable. This provides customer flexibility in their design and
manufacturing. |
| • |
Automotive |
• |
Base Station |
• |
Components |
| • |
GPS |
• |
Head End Equipment |
• |
Instrumentation |
| • |
PC/LAN |
• |
Radios |
• |
Telecom |
| • |
WLAN |
• |
Wireless/Networks Antenna |
|
|
| Impedance |
50 Ω |
| Frequency Range |
DC - 6 GHz |
| VSWR |
1.06 max. @ DC - 2.5 GHz (straight)
1.1 max. @ DC - 2.5 GHz (right angle) |
| RF-Leakage |
60 dB minimum @ 1 GHz (flexible cable) (CECC 22000-4.4.8)
70 dB minimum @ 1 GHz (semi-rigid cable) |
| Voltage Rating (at sea level) |
≥ 335 Vrms (depending on cable) |
| Contact Resistance |
Center Contact: ≤ 5 mΩ (CECC 22000-4.4.2)
Outer Contact: ≤ 2.5 mΩ (CECC 22000-4.4.3) |
| Insulation Resistance |
10,000 MΩ minimum (CECC 22000-4.4.4) |
| Insertion Loss Maximum |
0.10 dB @ 1 GHz |
| Dielectric Withstanding Voltage |
1,000 Vrms (at sea level) (CECC 22000-4.4.5) |
| Mating |
Snap-on coupling per CECC 22220 |
| Braid/Jacket Cable Affixment |
Hex crimp |
| Center Conductor Cable Affixment |
Solder |
| Captivated Contacts |
All, unless noted otherwise |
| Contact Captivation |
≥ 2.3 lbs (10N) (CECC 22000-4.5.2)
|
| Engagement Force |
≤ 5.6 lbs (25N) (CECC 22000-4.5.1) |
| Disengagement Force |
≥ 2.3 lbs (10N) (CECC 22000-4.5.1) |
| Durability (matings) |
500 cycles minimum (CECC 22000-4.7.1) |
| Temperature Range |
-55°C to +155°C |
| Thermal Shock |
MIL-STD-202, method 107, cond. F (CECC 22000-4.6.7) |
| Moisture Resistance |
MIL-STD-202, method 106 (CECC 22000-4.6.6) |
| Corrosion |
MIL-STD-202, method 101, cond. B (CECC 22000-4.6.10) |
| Vibration |
MIL-STD-202, method 204, cond. D (CECC 22000-4.6.3) |
| Mechanical Shock |
MIL-STD-202, method 213, cond. B |
| Male Contact |
Brass, 30µ gold plated |
| Female Contact |
Beryllium copper, 30µ gold plated |
| Crimp Ferrule |
Copper or brass, nickel plated |
| Other Metal Parts |
Brass, nickel or gold plated |
| Insulator |
PTFE |
| Gasket |
Silicone rubber |
Note: These characteristics are typical but may not apply to
all connectors.
| Impedance |
75Ω |
| Frequency Range |
DC - 6 GHz |
| VSWR |
1.06 max. @ DC - 2.5 GHz (straight)
1.1 max. @ DC - 2.5 GHz (right angle)
|
| RF-Leakage |
60 dB minimum @ 1 GHz (flexible cable) (CECC 22000-4.4.8)
70 dB minimum @ 1 GHz (semi-rigid cable) |
| Voltage Rating (at sea level) |
≥ 170 Vrms (depending on cable) |
| Contact Resistance |
Center Contact: ≤ 5 mΩ (CECC 22000-4.4.2)
Outer Contact: ≤ 2.5 mΩ (CECC 22000-4.4.3) |
| Insulation Resistance |
10,000 MΩ minimum (CECC 22000-4.4.4) |
| Insertion Loss Maximum |
0.10 dB @ 1 GHz |
| Dielectric Withstanding Voltage |
500 Vrms (at sea level) (CECC 22000-4.4.5) |
| Mating |
Snap-on coupling per CECC 22220 |
| Braid/Jacket Cable Affixment |
Hex crimp |
| Center Conductor Cable Affixment |
Solder |
| Contact Captivation |
≥ 2.3 lbs (10N) (CECC 22000-4.5.2) |
| Engagement Force |
≤ 5.6 lbs (25N) (CECC 22000-4.5.1)
≥ 1.8 lbs (8N) (CECC 22000-4.5.1)
|
| Durability (matings) |
500 mating cycles minimum (CECC 22000-4.7.1) |
| Temperature Range |
-55°C to +165°C |
| Thermal Shock |
MIL-STD-202, method 107, cond. F (CECC 22000-4.6.7) |
| Moisture Resistance |
MIL-STD-202, method 106 (CECC 22000-4.6.6) |
| Corrosion |
MIL-STD-202, method 101, cond. B (CECC 22000-4.6.10) |
| Vibration |
MIL-STD-202, method 204, cond. D (CECC 22000-4.6.3) |
| Mechanical Shock |
MIL-STD-202, method 213, cond. B |
| Male Contact |
Brass, 30µ gold plated |
| Female Contact |
Beryllium copper, 30µ gold plated |
| Crimp Ferrule |
Copper or brass, nickel plated |
| Other Metal Parts |
Brass, nickel or gold plated |
| Insulator |
PTFE |
| Gasket |
Silicone rubber |
Note: These characteristics are typical but may not apply to
all connectors.
 |
|
 |
|
