Product Searches
|
 |
 |
|
|
|
|
The MMCX series is also called MicroMateTM. It is one of Amphenol's smallest
RF connector line and was developed in the 1990's. MMCX is a micro-miniature
connector series with a lock-snap mechanism allowing for 360 degrees
rotation enabling flexibility in PCB layouts. MMCX connectors conform
to the European CECC 22000 specification.
The micromate family of products is a 6 GHz 50 Ω
interconnect system. A range of connectors are available including
surface mount, edge card, and cable connectors.
| • |
Broadband performance with low reflection
DC to 6 GHz, providing a high-quality solution at a low cost |
| • |
Quick connect/disconnect snap-on
mating reduces installation time |
| • |
Conforms to European CECC 22000 specifications |
| • |
Available in straight and right angle
plugs and printed circuit board connectors |
| • |
Antennas |
• |
Base stations |
• |
Broadband communications |
| • |
Cable assemblies |
• |
Components |
• |
GPS |
| • |
Instrumentation |
• |
PCMCIA cards |
• |
Radio boards |
| • |
Satcom |
• |
Telecom |
|
|
|
| Impedance |
|
50 Ω |
| Frequency Range |
|
DC - 6 GHz |
| VSWR |
4.4.1 |
1.15 max. @ DC - 4 GHz |
| 1.40 max. @ 4 - 6 GHz |
| RF-Leakage |
4.4.8 |
60 dB minimum @ 1 GHz (flexible cable)
70 dB minimum @ 1 GHz (semi-rigid cable) |
| Voltage Rating (at sea level) |
|
≤ 170 Vrms (depending on cable) |
| Contact Resistance |
4.4.2 |
center contact: ≤ 10 mΩ |
| |
4.4.3 |
outer contact: ≤ 5 mΩ |
| Insulation Resistance |
4.4.4 |
1,000 MΩ minimum |
| Dielectric Withstanding Voltage |
4.4.5 |
500 Vrms (at sea level) |
| |
| Mating |
|
Snap-on coupling |
| Contact Captivation |
4.5.2 |
2.3 lbs |
| Engagement Force |
4.5.4 |
≤ 3.4 lbs (15N) |
| Disengagement Force |
4.5.4 |
≥ 1.4 lbs (6N) |
| Durability (matings) |
4.7.1 |
500 cycles minimum |
| Temperature Range |
4.6.5 |
-55° C to +155° C |
| Thermal Shock |
4.6.7 |
MIL-STD-202, method 107, cond. F |
| Moisture Resistance |
4.6.6 |
MIL-STD-202, method 106 |
| Corrosion |
4.6.10 |
MIL-STD-202, method 101, cond. B |
| Vibration |
4.6.3 |
3 cycles, 3 opposite directions, 10 - 150 Hz
10 - 60 Hz: 0.75mm/0.03in., 60-150 Hz: 10 G |
| Mechanical Shock |
4.6.4 |
MIL-STD-202, method 213, cond. B |
| Humidity |
4.6.6 |
MIL-STD-202, method 103, cond. B |
| Body and Outer Contacts |
|
Brass, nickel or gold plated |
| Male Contact |
|
Brass, gold plated |
| Female Contact |
|
Beryllium copper or phosphor bronze, gold plated |
| Crimp Ferrule |
|
Copper or brass, nickel plated |
| Insulator |
|
LCP, PTFE or PFA |
Note: These characteristics are typical but may not apply to
all connectors.
 |
|
 |
|
