|
| Impedance |
50 Ω constant |
| Frequency range |
0-11 GHz, 1500 V typ.
|
| Voltage rating |
1000 volts peak.
|
| Dielectric Withstanding Voltage |
3000 volts RMS
|
| VSWR (MIL-C-39012 Cable Connectors) |
1.35 max. to 0-11 GHz
|
| Other (MIL-C-39012 Cable Connectors) |
Contact Resistance
Center contact 1.0 milliohm
Outer contact .15 milliohm
Braid to Body .05 milliohm
RF Leakage: - 90 dB minimum at 3 GHz
Insertion los: .15 dB
maximum at 9 GHz
Insulation resistance: 5,000 M Ω (min.)
|
NOTE: 13 lb. push required to captivate contact into connector body.
|
|
| Mating |
11/16-24 UNEF screw threads. Plug coupling nut has safety wire holes. |
Cable affixment
Contact Cable Retention
|
Crimp-crimp: hex-crimp jacket, braid, center contact per MIL-C-39012
Category D.
Captivated
.155" to .189" dia.
cable 50 lbs. min.
.190" to 229" dia.
cable: 75 lbs. min.
.250" dia. and larger:
90 lbs. min. |
|
| Contacts |
Male: Brass; female; beryllium copper or phosphor bronze, gold plated
Female and Outer beryllium copper. |
| Insulators |
TFE |
| Crimp Ferrule |
Copper |
| Other metal parts |
Brass |
|
| MIL-C-39012 |
Where applicable |
Note: These characteristics are typical but may not apply to
all connectors.
|
|
| Temperature Range |
TFE -65°C to +165°C
-65°C to +165°C |
| Shock |
MIL-Std-202 method 213 |
| Vibration |
MIL-Std-202 method 204
(test condition B) |
| Moisture Resistance |
MIL-Std-202 method 106 |
| Corrosion |
MIL-Std-202 method 101
(test condition B) |
| Temperature Cycling |
MIL-Std-202 method 102
(test condition C) |
