RP-SMAコネクタ
最大18 GHzまで50 ΩのRF性能を実現する、安全な逆極性SMAコネクタ
概要
アンフェノールRFのRP-SMAコネクタは、コンパクトで確実な50Ωインターフェースが必要であり、安全性の向上と規制への準拠のために逆極性機能を備えたアプリケーションに最適です。 これらのコネクタは、業界標準の電気的性能を維持しつつ、不正なアンテナ接続を防止する逆極性ネジ式インターフェースを備えており、ワイヤレス、Wi-Fi、およびセキュアなRFシステムに最適です。
RP‑SMAケーブルアセンブリは、完全な耐高電圧試験および導通試験を受けています(精密試験用ケーブルを除く)。標準構成では、マイクロ同軸ケーブルと組み合わせる場合を除き、熱収縮チューブが使用されています。気密密封や低PIM仕様ではありませんが、IP67規格に準拠したバルクヘッドジャックは、堅牢で耐候性に優れた選択肢を提供します。
特長と利点
- 逆極性インターフェースにより誤接続を防止し、FCCのアンテナ規制要件を満たします
- DCから18 GHzまでの広帯域性能により、多様なRFシステムに対応
- ネジ式カップリングにより、振動の多い環境でも信頼性が高く確実な接続を実現
- RPインターフェースを強制しつつ、標準的なSMA RFパスとの互換性を確保
- 屋外および過酷な環境での用途向けに、IP67規格準拠のバルクヘッドオプションを用意
主な技術仕様
- インピーダンス:50 Ω
- 周波数範囲:DC~18 GHz(正確な性能はケーブルの種類によって異なります)
- 許容電力および損失:標準SMAと同等。ケーブルの仕様を参照してください
- 結合方式:逆ネジ式、コンパクトで確実な接続
- 機械的耐久性:通常、500回の嵌合サイクルに対応(メッキや材質によって異なります)
用途
- Wi-Fiルーター、アクセスポイント、および規制に準拠したワイヤレスシステム
- IoTデバイスおよび組み込み型ワイヤレスモジュール
- RPインターフェースを必要とするアンテナ延長ケーブル
- 確実なケーブル固定が必要な試験・計測機器
- IP67規格準拠のコネクタを採用した屋外用およびポータブル電子機器
RP-SMAアセンブリは、信頼性を確保するため、耐高電圧試験および導通試験を実施しています。高精度RP-SMAテストケーブルは、スイープ試験を経てシリアル番号が割り当てられています。
当社の標準RP-SMAコネクタのラインナップをご覧いただくか、お客様の設計要件に合わせたカスタム構成については、当社のエンジニアリングチームまでお問い合わせください。
仕様
SMAコネクタ
電気
| インピーダンス | 50 オーム |
| 周波数範囲 | DC ~ 18 GHz(拡張範囲設計では最大 34 GHz) |
| 定格電圧 | 335 ボルト RMS(連続) |
| 絶縁耐電圧 | 1000 VRMS 以上 |
| VSWR(反射損失) | |
|
M39012 ストレートコネクタ
|
|
|
外径 0.141 インチの銅ジャケットケーブル
|
1.05 + 0.005 f (GHz) |
|
RG-58/RG-142 グループ
|
1.15 + 0.011 f (GHz) DC~12.4 GHz |
|
RG-174/RG-316 グループ
|
1.15 + 0.02 f (GHz) DC~12.4 GHz |
|
RG-178 グループ
|
1.20 + 0.025 f (GHz) DC~12.4 GHz |
|
M39012 アングルコネクタ
|
|
|
外径 0.141 インチの銅被覆ケーブル
|
1.10 + 0.01 f (GHz) |
|
RG-58/RG-142 グループ
|
1.15 + 0.02 f (GHz) DC~12.4 GHz |
|
RG-174/RG-316 グループ
|
1.15 + 0.03 f (GHz) DC~12.4 GHz |
|
RG-178 グループ
|
1.20 + 0.03 f (GHz) DC~12.4 GHz |
| 絶縁抵抗 | 5000 MΩ 以上 |
| 中心接触抵抗 | 3.0 mΩ 以下 |
| 外側接触抵抗 | 2.0 mΩ(最大 |
| RFリーク | 最大 -60 dB(DC ~ 3 GHz) |
| 挿入損失 | 0.06 √(f (GHz)) dB 以下 |
| 許容電力 | 75 W @ 10 GHz @ 25ºC |
環境
| 温度範囲 | |
|
標準
|
-65°C ~ +165°C |
|
スチレン絶縁体またはリン青銅接点
|
-40°C ~ +85°C |
| 熱衝撃 | MIL-STD-202、方法 107(試験条件 B)、ただし +200°C での高温試験を除く |
| 腐食 | MIL-STD-202、方法 101(試験条件 B) - 5% 塩水溶液 |
| 振動 | MIL-STD-202、方法 204(試験条件 D) |
| 機械的衝撃 | MIL-STD-202、方法 213(試験条件 I) - 不連続は許容されない |
| 耐湿性 | MIL-STD-202、方法 106 |
| 高度 | MIL-STD-202、方法 105(試験条件 C) |
機械的
| 嵌合サイクル | 500 分 |
| 結合機構ねじ込み式 | ネジ式 |
| インターフェース仕様 | MIL-STD-348 |
| 嵌合トルク(ステンレス製プラグ) | 0.8~1.1 N・m (7~10 in-lbs) |
| 嵌合トルク(真鍮製プラグ) | 0.3~0.6 N・m (3~5 in-lbs) |
注:これらの特性は代表値であり、すべてのコネクタに当てはまるとは限りません。
コネクタの構成によって性能が異なる場合があります。
インターフェースの寸法
プラグ
ジャック
関連リソース
RP-SMA to AMC4 Cable Assemblies Datasheet
Amphenol RF's RP-SMA to AMC4 cable assemblies provide reliable performance up to 6 GHz in compact applications. Featuring an IP67-rated RP-SMA bulkhead jack for waterproof protection, they use ultra-thin 1.13 mm coaxial cable for easy routing in tight spaces. Available in standard lengths from 50 to 400 mm, with custom options on request, they are made from gold-plated brass and phosphor bronze for durability. Designed for IoT, GPS, wireless communication, and industrial enclosures, they operate from -40°C to 90°C with a 50Ω impedance and 200 VRMS dielectric withstanding voltage.
RP-SMA Cable Assemblies
Amphenol RF's RP-SMA Cable Assemblies feature gold-plated brass bodies and support up to 500 mating cycles, designed for applications requiring low-loss antenna connections. These fixed length assemblies on RG-58, RG-174, and RG-316 cables offer reliable performance up to 5 GHz, ideal for laboratory RF test and measurement, wireless LAN antennas, land mobile radio, and cellular communication systems.
IP67 SMA & RP-SMA Panel Mount Bulkhead Jacks
Amphenol RF's IP67 SMA Front Mount Bulkhead Jacks offer waterproof, tamper-resistant RF interconnect solutions with reliable electrical performance up to 6 GHz. Designed for applications like antennas, base stations, and industrial automation, these connectors feature a threaded coupling mechanism for secure mating and are ideal for use in space-constrained environments.
SMA & RP-SMA Crimp Connectors
Amphenol RF's SMA and RP-SMA Straight Crimp Jacks provide reliable electrical performance up to 6 GHz, featuring a threaded coupling mechanism for secure mating and vibration resistance. These 50 ohm connectors are ideal for applications with space constraints, such as antennas, base stations, drones, and test and measurement equipment, and are available for various micro-coax cable types.
RP-SMA to AMC Ultraminiature Cable Assemblies
Amphenol RF's RP-SMA to AMC Cable Assemblies offer reliable electrical performance up to 9 GHz, featuring threaded coupling for secure mating and vibration resistance. These assemblies are available in both IP67 and non-IP67 configurations, ideal for applications such as antennas, base stations, drones, and industrial automation, providing a space-efficient solution with a small footprint and low profile.
MHF I LK Ultraminiature Cable Assemblies
Amphenol RF's Locking MHF I Cable Assemblies feature a patented locking system for tamper-resistant, vibration-resistant performance, available with waterproof IP67 options. These 50 ohm assemblies are ideal for applications such as drones, GPS, and industrial automation, offering reliable electrical performance up to 6 GHz with configurations including SMA, RP-SMA, TNC, and RP-TNC connectors.
2.92 mm Adapter Series Datasheet
The datasheet provides an overview of Amphenol RF’s 2.92 mm adapters. These precision adapters operate up to 40 GHz and feature a rugged, threaded design for reliable performance. They are used in testing, communications, aerospace, and satellite applications and are available in 2.92 mm to 2.4 mm and 2.92 mm to SMA configurations.
FAKRA to SMA Adapter Datasheet
The FAKRA to SMA Adapter datasheet describes Amphenol RF’s FAKRA to SMA adapters, which connect FAKRA-based automotive systems to SMA RF devices using a push-on FAKRA and threaded SMA interface for secure, application-specific connections up to 4 GHz. The adapters feature rugged nickel-plated brass bodies, gold-plated contacts, PTFE insulation, and glass-filled nylon housing, providing excellent return loss, high mating durability (500+ cycles), and reliable performance from −65°C to +165°C in automotive, industrial automation, telecom, connected vehicle, and RF test applications.
IP67 SMA Cable Assemblies Datasheet
Amphenol RF's IP67 SMA Bulkhead Cable Assemblies feature pre-configured 50 ohm assemblies on flexible RG-316 coaxial cable, designed for both indoor and outdoor applications. These assemblies, available in various lengths, offer secure locking with threaded connectors, providing reliable performance up to 3 GHz, and are ideal for industrial equipment, antennas, and military communications.
Locking SMA Cable Assemblies Datasheet
Amphenol RF's Locking SMA Cable Assemblies are designed for high-frequency applications up to 6 GHz, featuring a threaded SMA connector with a locking mechanism that requires 20N of force to prevent accidental disconnection. Built with gold-plated brass SMA connectors and phosphor bronze MHF I LK locking connectors, these assemblies ensure durability and resistance to harsh environments. The easily routable 1.13 mm cable allows for flexible installation in compact spaces, making them ideal for drones, wireless communications, robotics, IoT, and industrial equipment. Available in standard lengths from 50 to 400 mm, with custom lengths on request, they provide reliable performance in demanding applications.
SMA Cable Assemblies on RG-188 Datasheet
The SMA Cable Assemblies on RG-188 offer reliable high-frequency transmission up to 3 GHz with low loss, low VSWR, and a rugged, threaded coupling for secure installation. Designed for aerospace, industrial, medical, and communication applications, they use flexible, high-shielding RG-188 cable that withstands temperatures up to 205°C. Available in various plug configurations and lengths from 6 inches to 2 meters, they feature a 50Ω impedance, 1000 VRMS dielectric withstanding voltage, and a 500-cycle mating durability. Made with gold-plated brass connectors and PTFE insulation, they operate from -55°C to 165°C and meet RoHS standards.
4.3-10 Adapters
Amphenol RF introduces a comprehensive line of 4.3/10 low PIM adapters, expanding their low PIM adapter product family. These adapters are designed for space-restricted, high-density, and weight-sensitive applications, offering superior PIM performance and reduced mating torque compared to 7/16 DIN connectors, with in-series and between-series configurations available.
AMMC Connector Series
Amphenol Micro Miniature Coaxial (AMMC) connectors are designed for portable and mobile devices, featuring a low profile with a 1.4 mm mated height and a 2 mm x 2 mm footprint. These connectors support high-frequency transmission from DC to 6 GHz, offer easy snap-on/off mating, and are compatible with Hirose W.FL and IPEX MHF III series, making them ideal for applications such as antennas, Bluetooth, GPS, WLAN, and cellular devices.
HD-EFI Connector Series
The HD-EFI product series by Amphenol RF offers micro-miniature interfaces designed for high-performance applications with a frequency range from DC to 6 GHz. These 50 ohm products are ideal for board-to-board applications, featuring versatile PCB mounts and bullet lengths, and providing up to 1.4 mm axial and radial float. HD-EFI connectors are available in various configurations, including through-hole, surface mount, edge launch, and thread-in, and support blind mating with crash-proof designs.
ATC-PS Precision Test Cables
The ATC-PS cable assemblies cutsheet provides info for ATC-PS cable assemblies, outlining their technical specifications, features, and applications. It provides precise information on the design and performance characteristics of these cable assemblies, including impedance, frequency range, insertion loss, and durability. The document highlights the materials used, ensuring reliability and high performance in demanding environments. Additionally, it specifies the industries and applications these cable assemblies are designed for, demonstrating their suitability for various high-frequency and precision connectivity needs.
High Frequency SMA Connector Series
The Amphenol RF High-Frequency SMA Connectors Cut Sheet presents a premium line of high-performance SMA connectors engineered for exceptional signal integrity at high frequencies. Designed to support applications up to 27 GHz and beyond, these connectors deliver low VSWR, minimal insertion loss, and superior durability, making them ideal for 5G, aerospace, defense, and high-speed communication systems.
Connectors Optimized for Low Loss Cables
The "Connectors Optimized for Low Loss Cables" guide by Amphenol RF features redesigned SMA, TNC, and N-Type connectors specifically tailored for Low Loss cables. These connectors, which include straight and right-angle plugs and jacks, provide enhanced shielding, improved grounding, and low signal loss for applications requiring high reliability, such as smart city infrastructure and IoT antenna systems. They support frequencies up to 12.4 GHz for SMA and 6 GHz for TNC and N-Type connectors, ensuring consistent electrical performance and quick, secure assembly with standard hex crimp tooling.
SMA Cable Assemblies on LMR Cable
The Amphenol RF SMA cable assemblies cut sheet details pre-configured assemblies using LMR-195 and LMR-240 cables, ideal for high-performance applications such as base stations, antennas, and telecommunication devices. These assemblies, featuring SMA connectors and Times Microwave LMR cables, operate from DC to 6 GHz, offering lower loss and superior electrical performance with rugged construction. Configurations include straight plug, right-angle plug, and bulkhead jack, available in various lengths and custom options upon request.
SMA Panel Mount Receptacles
The Amphenol RF SMA Panel Mount Receptacles cut sheet details high-performance connectors supporting frequencies from DC to 18 GHz. These stainless steel receptacles are available in multiple panel mounting configurations, including 2 and 4-hole flanges, with various termination options such as post contacts, solder cups, and tab contacts. The connectors are suitable for applications like RF amplifiers, microwave filters, and power dividers, offering excellent VSWR performance and robust mechanical construction.
SMA Quick Connect Adapter Series
The Amphenol RF SMA Quick Connect Adapter Cut Sheet highlights a high-performance, rapid-mating SMA adapter designed for efficiency and reliability in RF testing and system integration. This adapter enables quick, secure connections without the need for threading, significantly reducing installation time and improving workflow efficiency. Engineered for low-loss signal transmission and durability, it is ideal for laboratory testing, production environments, and high-frequency applications.
SMA to AMC Cable Assemblies
The Amphenol RF SMA to AMC Cable Assemblies cut sheet outlines both IP-67 and non-IP-67 fixed length assemblies designed for various applications. These assemblies feature improved design SMA connectors, offering space-efficient and economical improvements, with support for thicker panels. They are ideal for WLAN, M2M communications, and outdoor equipment, and are available in different configurations with micro-coaxial cables in lengths from 50 mm to 300 mm.
SMA Connectors for TFC-302LL
Amphenol RF's SMA Connectors for Automotive Cable are compact, lightweight, and optimized for low loss cables, offering reliable performance up to 6 GHz. These connectors are ideal for applications requiring vibration resistance and low return loss, such as automotive testing, antennas, GPS, and V2V communication, and are available in bulkhead jack, straight, and right-angle plug configurations.
Anti-Torque SMA Connector Series
Amphenol RF's Anti-Torque SMA Connector Series offers high-frequency connectors designed for semi-rigid cables, supporting applications up to 26.5 GHz with SMA jacks and up to 34 GHz with 3.5 mm jack connectors. These connectors feature a rugged anti-torque body to prevent damage during installation and are ideal for test and measurement equipment, 5G wireless infrastructure, IoT, and industrial IoT applications. Constructed from brass or stainless steel with gold plating, they support a minimum of 500 mating cycles and ensure reliable performance with minimal reflections.
High Performance SMA Adapter Series
The Amphenol RF High Performance SMA Adapter series offers low-profile, cost-saving adapters with improved VSWR performance, operating up to 22 GHz. These adapters, featuring gold-plated brass bodies and beryllium copper contacts, are ideal for applications in SATCOM, radar, antennas, and wireless testing.
FAKRA to SMA Cable Assemblies
The Amphenol RF FAKRA to SMA Cable Assemblies Datasheet details pre-configured 50 ohm cable assemblies available in various lengths, designed for automotive and industrial applications such as ADAS, GPS, RFID, and wireless infrastructure. These assemblies feature flexible cables and high-quality connectors, providing reliable performance up to 3 GHz without the need for additional tooling.
SMA Panel Mount Bulkhead Jacks
Amphenol RF's SMA & RP-SMA Front Mount Bulkhead Jacks offer reliable electrical performance up to 6 GHz and feature a threaded coupling mechanism for secure mating. These 50 ohm connectors are ideal for applications with space constraints, such as antennas, base stations, drones, and test and measurement equipment, with options available for ultraminiature micro-coax cables and IP67-rated versions for added environmental protection.
SMA to AMC Ultraminiature Cable Assemblies
Amphenol RF's SMA to AMC Cable Assemblies feature reliable electrical performance up to 9 GHz, with threaded coupling for secure mating and vibration resistance. Available in IP67 and non-IP67 configurations, these 50 ohm assemblies are ideal for applications such as antennas, base stations, drones, and industrial automation, providing a compact and space-efficient solution with additional protection for harsh environments.
AUTOMATE Type A to Mini-FAKRA to SMA Cable Assemblies
Amphenol RF's AUTOMATE Mini-FAKRA breakout cables feature a quad-port Mini-FAKRA jack to four SMA plugs or jacks, designed on flexible TFC-302LL cable. These assemblies provide up to 80% space savings compared to traditional FAKRA connectors and support high-performance up to 9 GHz. Ideal for automotive applications like 360-degree cameras and ADAS, as well as antennas, handheld devices, and drones, they offer secure, low-engagement force connections with a compact, modular design and universal Z color coding.
Nex10 Adapter Series
Amphenol RF's Nex10 Adapter Series features ruggedized, compact 50 ohm adapters offering reliable low PIM performance up to 6 GHz. These lightweight, threaded adapters are ideal for high-density applications such as antennas, small cells, distributed antenna systems (DAS), MIMO, and 5G/LTE, designed to reduce interference and maintain network quality.
Amphenol RF Locking MHF 4 Ultraminiature Cable Assemblies Datasheet
The Amphenol RF Locking MHF 4 Ultraminiature Cable Assemblies datasheet describes pre-configured, vibration-resistant 50-ohm cable assemblies featuring the I-PEX MHF® 4 LK locking connector. These ultraminiature assemblies are designed with tamper-resistant, waterproof (IP67) options and utilize 1.37 mm micro-coax cable paired with SMA or RP-SMA connectors for reliable electrical performance in rugged environments. Ideal for continuous shock and vibration applications, they are used in UAVs, IoT devices, military systems, smart agricultural equipment, and communication networks. The datasheet also outlines available standard lengths (50–400 mm) and key specifications, including a frequency range up to 9 GHz, 500 mating cycles minimum, and materials such as gold-plated brass and PTFE insulation.
Amphenol RF PFAS-Free SMA Connectors & Adapters
Amphenol RF’s PFAS-free SMA connectors and adapters, engineered with eco-friendly PEEK insulators as drop-in replacements for traditional PTFE-based designs. This product line delivers comparable or improved performance, enhanced thermal stability, and full compatibility with existing SMA solutions, offering a sustainable RF interconnect option for demanding applications.
Amphenol RF MCX Cable Assemblies RG-174 Wireless Communication Modules Datasheet
The Amphenol RF MCX Cable Assemblies Data Sheet highlights between-series board-to-panel cable solutions designed for wireless communication modules. These assemblies combine compact MCX interfaces with rugged, sealed bulkhead connectors to enable reliable RF connectivity in space-constrained and environmentally exposed applications.
Amphenol RF MMCX Cable Assemblies RG-174 for Wireless Modules
The Amphenol RF MMCX cable assemblies datasheet outlines pre-configured 50-ohm RF cable solutions using flexible RG-174 coax for reliable connections in wireless communication modules. It highlights available connector configurations, electrical performance characteristics, and suitability for applications such as IoT, GPS, Wi-Fi, and other compact RF systems.
Amphenol RF MCX Cable Assemblies RG-316 Wireless Communication Modules Datasheet
This datasheet highlights Amphenol RF’s MCX cable assemblies for wireless communication modules, featuring between-series board-to-panel configurations built on flexible RG-316 cable for reliable performance up to 6 GHz. The assemblies combine MCX straight or right-angle plugs with rugged, IP67-rated bulkhead connectors—including SMA, RP-SMA, TNC, RP-TNC, and N-Type—designed to provide secure, sealed connections that protect systems from temporary water and fluid ingress. Optimized for short-distance RF applications, these cable assemblies offer high heat resistance, durability, and low signal loss, making them well-suited for portable IoT devices, drones, GPS/GNSS, Wi-Fi, and demanding industrial, agricultural, and construction environments, with a wide range of standard and custom cable lengths available.
SMA to Unterminated Cable Assemblies Datasheet
Amphenol RF’s SMA to unterminated cable assemblies provide a highly flexible 50-ohm solution designed to support efficient RF system integration and custom termination requirements. Built on a range of flexible and conformable cable types, these assemblies enable engineers to hand-form routing paths and terminate to the connector or interface of their choice, delivering maximum design versatility. The SMA interface ensures a secure, reliable connection with broad compatibility across standard RF equipment, making these assemblies well-suited for demanding applications such as test and measurement, aerospace and prototype development. With multiple standard lengths available and robust construction supporting performance up to 18 GHz, these SMA pigtail assemblies offer a dependable and adaptable solution for high-frequency design environments.
お問い合わせ
以下のフォームにご記入ください。折り返しご連絡いたします。
アスタリスク(*)が付いている項目は必須です。