SMA端子
信頼性の高いSMAインターフェースを採用したコンパクトな50Ω RF端子。高周波および高精度システム用途向け
概要
アンフェノールRFのSMAターミネーター製品群は、広く普及しているSMAネジ式インターフェースに直接接続できる終端ソリューションを、エンジニアや購買担当者に提供します。これらのターミネーターは、適切なインピーダンス整合を確保し、未使用ポートでの信号反射を最小限に抑えることで、システムの安定性と性能を向上させます。
高周波かつ省スペースなRFアセンブリ向けに設計されたSMAターミネーターは、約18 GHzまでの広帯域動作(SMAコネクタの性能に基づく)に対応しており、カタログに掲載された多数の標準バリエーションが用意されています。
特長と利点
- 一般的なRF同軸システムやSMAコネクタと互換性のある標準50 Ω終端により、部品の選定と在庫管理が簡素化されます。
- 高周波性能 — 多くのSMAターミネータは≈18 GHzまでの動作に対応しており、要求の厳しいRF、マイクロ波、および試験装置環境での使用が可能です。
- ネジ式結合機構(SMA インターフェースから継承)により、確実な機械的結合、耐振動性、および過酷な環境に適した堅牢性を実現しています。
- コンパクトなフォームファクタは、高密度な RF レイアウト、基板とケーブルのインターフェース、およびモジュラーアセンブリに有用であり、システム全体で一貫したインピーダンス終端を維持します。
- Amphenol RF の実績あるサプライチェーンとドキュメントにより、エンジニアは詳細な仕様、明確な製品ラインナップ、および世界的な入手可能性を確実に利用できます。
主な技術詳細
- インピーダンス:SMA ターミネータ製品ラインの公称値は 50 Ω です。
- 周波数範囲:SMA コネクタファミリーに基づき、標準的な性能は DC から約 18 GHz までです。ターミネータの性能は、ケーブルおよび構成によって異なります。
- 嵌合サイクル:SMA コネクタシリーズは、標準条件下で最低約 500 回の嵌合サイクルに耐える定格となっています。ターミネータの使用状況は、設計や環境によって異なる場合があります。
- 温度範囲:Amphenol RF社のSMAコネクタファミリーの動作温度範囲は、–65 °C~+165 °C程度とされています。正確な定格については、各ターミネータ部品のデータシートをご参照ください。
- 特長:コンパクトなSMAインターフェース、堅牢なネジ式結合、高周波ターミネーション機能。注:標準的なSMAターミネーターは、部品のデータシートに明示的に記載されていない限り、気密密封またはIP67規格準拠とは記載されていません。
用途
- 校正、精度、および信号の完全性を維持するために、未使用のSMAポートを終端処理する必要がある試験・測定システム。
- 10 GHz~18 GHz付近で動作し、SMAコネクタへの整合終端を必要とする高周波マイクロ波サブシステム、計測モジュール、またはRFフロントエンド。
- コンパクトで標準化された終端処理により、統合とメンテナンスの効率化が図られる、モジュラー型 RF アセンブリ、基板とケーブルのインターフェース、および同軸パッチパネルシステム。
- SMA 相互接続を使用し、反射や信号漏れを防ぐために予備ポートの信頼性の高い終端処理が必要な、通信、ワイヤレスインフラ、または産業用 RF システム。
- エンジニアが信頼性の高いコネクタ規格や、仕様が明確に文書化された終端部品を必要とする、一般的なRFシステムの構築や実験室環境。
アンフェノールRFのSMAターミネーターの全ラインナップをご覧ください。お客様の用途で、標準カタログに記載されていないカスタムインピーダンス仕様、より高い定格電力、特殊な表面処理、または環境シールが必要な場合は、当社のエンジニアリングチームまでお問い合わせいただき、オーダーメイドのソリューションをご検討ください。
関連リソース
2.92 mm Adapter Series Datasheet
The datasheet provides an overview of Amphenol RF’s 2.92 mm adapters. These precision adapters operate up to 40 GHz and feature a rugged, threaded design for reliable performance. They are used in testing, communications, aerospace, and satellite applications and are available in 2.92 mm to 2.4 mm and 2.92 mm to SMA configurations.
FAKRA to SMA Adapter Datasheet
The FAKRA to SMA Adapter datasheet describes Amphenol RF’s FAKRA to SMA adapters, which connect FAKRA-based automotive systems to SMA RF devices using a push-on FAKRA and threaded SMA interface for secure, application-specific connections up to 4 GHz. The adapters feature rugged nickel-plated brass bodies, gold-plated contacts, PTFE insulation, and glass-filled nylon housing, providing excellent return loss, high mating durability (500+ cycles), and reliable performance from −65°C to +165°C in automotive, industrial automation, telecom, connected vehicle, and RF test applications.
IP67 SMA Cable Assemblies Datasheet
Amphenol RF's IP67 SMA Bulkhead Cable Assemblies feature pre-configured 50 ohm assemblies on flexible RG-316 coaxial cable, designed for both indoor and outdoor applications. These assemblies, available in various lengths, offer secure locking with threaded connectors, providing reliable performance up to 3 GHz, and are ideal for industrial equipment, antennas, and military communications.
Locking SMA Cable Assemblies Datasheet
Amphenol RF's Locking SMA Cable Assemblies are designed for high-frequency applications up to 6 GHz, featuring a threaded SMA connector with a locking mechanism that requires 20N of force to prevent accidental disconnection. Built with gold-plated brass SMA connectors and phosphor bronze MHF I LK locking connectors, these assemblies ensure durability and resistance to harsh environments. The easily routable 1.13 mm cable allows for flexible installation in compact spaces, making them ideal for drones, wireless communications, robotics, IoT, and industrial equipment. Available in standard lengths from 50 to 400 mm, with custom lengths on request, they provide reliable performance in demanding applications.
SMA Cable Assemblies on RG-188 Datasheet
The SMA Cable Assemblies on RG-188 offer reliable high-frequency transmission up to 3 GHz with low loss, low VSWR, and a rugged, threaded coupling for secure installation. Designed for aerospace, industrial, medical, and communication applications, they use flexible, high-shielding RG-188 cable that withstands temperatures up to 205°C. Available in various plug configurations and lengths from 6 inches to 2 meters, they feature a 50Ω impedance, 1000 VRMS dielectric withstanding voltage, and a 500-cycle mating durability. Made with gold-plated brass connectors and PTFE insulation, they operate from -55°C to 165°C and meet RoHS standards.
4.3-10 Adapters
Amphenol RF introduces a comprehensive line of 4.3/10 low PIM adapters, expanding their low PIM adapter product family. These adapters are designed for space-restricted, high-density, and weight-sensitive applications, offering superior PIM performance and reduced mating torque compared to 7/16 DIN connectors, with in-series and between-series configurations available.
AMMC Connector Series
Amphenol Micro Miniature Coaxial (AMMC) connectors are designed for portable and mobile devices, featuring a low profile with a 1.4 mm mated height and a 2 mm x 2 mm footprint. These connectors support high-frequency transmission from DC to 6 GHz, offer easy snap-on/off mating, and are compatible with Hirose W.FL and IPEX MHF III series, making them ideal for applications such as antennas, Bluetooth, GPS, WLAN, and cellular devices.
HD-EFI Connector Series
The HD-EFI product series by Amphenol RF offers micro-miniature interfaces designed for high-performance applications with a frequency range from DC to 6 GHz. These 50 ohm products are ideal for board-to-board applications, featuring versatile PCB mounts and bullet lengths, and providing up to 1.4 mm axial and radial float. HD-EFI connectors are available in various configurations, including through-hole, surface mount, edge launch, and thread-in, and support blind mating with crash-proof designs.
ATC-PS Precision Test Cables
The ATC-PS cable assemblies cutsheet provides info for ATC-PS cable assemblies, outlining their technical specifications, features, and applications. It provides precise information on the design and performance characteristics of these cable assemblies, including impedance, frequency range, insertion loss, and durability. The document highlights the materials used, ensuring reliability and high performance in demanding environments. Additionally, it specifies the industries and applications these cable assemblies are designed for, demonstrating their suitability for various high-frequency and precision connectivity needs.
High Frequency SMA Connector Series
The Amphenol RF High-Frequency SMA Connectors Cut Sheet presents a premium line of high-performance SMA connectors engineered for exceptional signal integrity at high frequencies. Designed to support applications up to 27 GHz and beyond, these connectors deliver low VSWR, minimal insertion loss, and superior durability, making them ideal for 5G, aerospace, defense, and high-speed communication systems.
Connectors Optimized for Low Loss Cables
The "Connectors Optimized for Low Loss Cables" guide by Amphenol RF features redesigned SMA, TNC, and N-Type connectors specifically tailored for Low Loss cables. These connectors, which include straight and right-angle plugs and jacks, provide enhanced shielding, improved grounding, and low signal loss for applications requiring high reliability, such as smart city infrastructure and IoT antenna systems. They support frequencies up to 12.4 GHz for SMA and 6 GHz for TNC and N-Type connectors, ensuring consistent electrical performance and quick, secure assembly with standard hex crimp tooling.
SMA Cable Assemblies on LMR Cable
The Amphenol RF SMA cable assemblies cut sheet details pre-configured assemblies using LMR-195 and LMR-240 cables, ideal for high-performance applications such as base stations, antennas, and telecommunication devices. These assemblies, featuring SMA connectors and Times Microwave LMR cables, operate from DC to 6 GHz, offering lower loss and superior electrical performance with rugged construction. Configurations include straight plug, right-angle plug, and bulkhead jack, available in various lengths and custom options upon request.
SMA Panel Mount Receptacles
The Amphenol RF SMA Panel Mount Receptacles cut sheet details high-performance connectors supporting frequencies from DC to 18 GHz. These stainless steel receptacles are available in multiple panel mounting configurations, including 2 and 4-hole flanges, with various termination options such as post contacts, solder cups, and tab contacts. The connectors are suitable for applications like RF amplifiers, microwave filters, and power dividers, offering excellent VSWR performance and robust mechanical construction.
SMA Quick Connect Adapter Series
The Amphenol RF SMA Quick Connect Adapter Cut Sheet highlights a high-performance, rapid-mating SMA adapter designed for efficiency and reliability in RF testing and system integration. This adapter enables quick, secure connections without the need for threading, significantly reducing installation time and improving workflow efficiency. Engineered for low-loss signal transmission and durability, it is ideal for laboratory testing, production environments, and high-frequency applications.
SMA to AMC Cable Assemblies
The Amphenol RF SMA to AMC Cable Assemblies cut sheet outlines both IP-67 and non-IP-67 fixed length assemblies designed for various applications. These assemblies feature improved design SMA connectors, offering space-efficient and economical improvements, with support for thicker panels. They are ideal for WLAN, M2M communications, and outdoor equipment, and are available in different configurations with micro-coaxial cables in lengths from 50 mm to 300 mm.
SMA Connectors for TFC-302LL
Amphenol RF's SMA Connectors for Automotive Cable are compact, lightweight, and optimized for low loss cables, offering reliable performance up to 6 GHz. These connectors are ideal for applications requiring vibration resistance and low return loss, such as automotive testing, antennas, GPS, and V2V communication, and are available in bulkhead jack, straight, and right-angle plug configurations.
Anti-Torque SMA Connector Series
Amphenol RF's Anti-Torque SMA Connector Series offers high-frequency connectors designed for semi-rigid cables, supporting applications up to 26.5 GHz with SMA jacks and up to 34 GHz with 3.5 mm jack connectors. These connectors feature a rugged anti-torque body to prevent damage during installation and are ideal for test and measurement equipment, 5G wireless infrastructure, IoT, and industrial IoT applications. Constructed from brass or stainless steel with gold plating, they support a minimum of 500 mating cycles and ensure reliable performance with minimal reflections.
High Performance SMA Adapter Series
The Amphenol RF High Performance SMA Adapter series offers low-profile, cost-saving adapters with improved VSWR performance, operating up to 22 GHz. These adapters, featuring gold-plated brass bodies and beryllium copper contacts, are ideal for applications in SATCOM, radar, antennas, and wireless testing.
FAKRA to SMA Cable Assemblies
The Amphenol RF FAKRA to SMA Cable Assemblies Datasheet details pre-configured 50 ohm cable assemblies available in various lengths, designed for automotive and industrial applications such as ADAS, GPS, RFID, and wireless infrastructure. These assemblies feature flexible cables and high-quality connectors, providing reliable performance up to 3 GHz without the need for additional tooling.
SMA Panel Mount Bulkhead Jacks
Amphenol RF's SMA & RP-SMA Front Mount Bulkhead Jacks offer reliable electrical performance up to 6 GHz and feature a threaded coupling mechanism for secure mating. These 50 ohm connectors are ideal for applications with space constraints, such as antennas, base stations, drones, and test and measurement equipment, with options available for ultraminiature micro-coax cables and IP67-rated versions for added environmental protection.
SMA to AMC Ultraminiature Cable Assemblies
Amphenol RF's SMA to AMC Cable Assemblies feature reliable electrical performance up to 9 GHz, with threaded coupling for secure mating and vibration resistance. Available in IP67 and non-IP67 configurations, these 50 ohm assemblies are ideal for applications such as antennas, base stations, drones, and industrial automation, providing a compact and space-efficient solution with additional protection for harsh environments.
IP67 SMA & RP-SMA Panel Mount Bulkhead Jacks
Amphenol RF's IP67 SMA Front Mount Bulkhead Jacks offer waterproof, tamper-resistant RF interconnect solutions with reliable electrical performance up to 6 GHz. Designed for applications like antennas, base stations, and industrial automation, these connectors feature a threaded coupling mechanism for secure mating and are ideal for use in space-constrained environments.
SMA & RP-SMA Crimp Connectors
Amphenol RF's SMA and RP-SMA Straight Crimp Jacks provide reliable electrical performance up to 6 GHz, featuring a threaded coupling mechanism for secure mating and vibration resistance. These 50 ohm connectors are ideal for applications with space constraints, such as antennas, base stations, drones, and test and measurement equipment, and are available for various micro-coax cable types.
AUTOMATE Type A to Mini-FAKRA to SMA Cable Assemblies
Amphenol RF's AUTOMATE Mini-FAKRA breakout cables feature a quad-port Mini-FAKRA jack to four SMA plugs or jacks, designed on flexible TFC-302LL cable. These assemblies provide up to 80% space savings compared to traditional FAKRA connectors and support high-performance up to 9 GHz. Ideal for automotive applications like 360-degree cameras and ADAS, as well as antennas, handheld devices, and drones, they offer secure, low-engagement force connections with a compact, modular design and universal Z color coding.
Nex10 Adapter Series
Amphenol RF's Nex10 Adapter Series features ruggedized, compact 50 ohm adapters offering reliable low PIM performance up to 6 GHz. These lightweight, threaded adapters are ideal for high-density applications such as antennas, small cells, distributed antenna systems (DAS), MIMO, and 5G/LTE, designed to reduce interference and maintain network quality.
MHF I LK Ultraminiature Cable Assemblies
Amphenol RF's Locking MHF I Cable Assemblies feature a patented locking system for tamper-resistant, vibration-resistant performance, available with waterproof IP67 options. These 50 ohm assemblies are ideal for applications such as drones, GPS, and industrial automation, offering reliable electrical performance up to 6 GHz with configurations including SMA, RP-SMA, TNC, and RP-TNC connectors.
Amphenol RF Locking MHF 4 Ultraminiature Cable Assemblies Datasheet
The Amphenol RF Locking MHF 4 Ultraminiature Cable Assemblies datasheet describes pre-configured, vibration-resistant 50-ohm cable assemblies featuring the I-PEX MHF® 4 LK locking connector. These ultraminiature assemblies are designed with tamper-resistant, waterproof (IP67) options and utilize 1.37 mm micro-coax cable paired with SMA or RP-SMA connectors for reliable electrical performance in rugged environments. Ideal for continuous shock and vibration applications, they are used in UAVs, IoT devices, military systems, smart agricultural equipment, and communication networks. The datasheet also outlines available standard lengths (50–400 mm) and key specifications, including a frequency range up to 9 GHz, 500 mating cycles minimum, and materials such as gold-plated brass and PTFE insulation.
Amphenol RF PFAS-Free SMA Connectors & Adapters
Amphenol RF’s PFAS-free SMA connectors and adapters, engineered with eco-friendly PEEK insulators as drop-in replacements for traditional PTFE-based designs. This product line delivers comparable or improved performance, enhanced thermal stability, and full compatibility with existing SMA solutions, offering a sustainable RF interconnect option for demanding applications.
Amphenol RF MCX Cable Assemblies RG-174 Wireless Communication Modules Datasheet
The Amphenol RF MCX Cable Assemblies Data Sheet highlights between-series board-to-panel cable solutions designed for wireless communication modules. These assemblies combine compact MCX interfaces with rugged, sealed bulkhead connectors to enable reliable RF connectivity in space-constrained and environmentally exposed applications.
Amphenol RF MMCX Cable Assemblies RG-174 for Wireless Modules
The Amphenol RF MMCX cable assemblies datasheet outlines pre-configured 50-ohm RF cable solutions using flexible RG-174 coax for reliable connections in wireless communication modules. It highlights available connector configurations, electrical performance characteristics, and suitability for applications such as IoT, GPS, Wi-Fi, and other compact RF systems.
Amphenol RF MCX Cable Assemblies RG-316 Wireless Communication Modules Datasheet
This datasheet highlights Amphenol RF’s MCX cable assemblies for wireless communication modules, featuring between-series board-to-panel configurations built on flexible RG-316 cable for reliable performance up to 6 GHz. The assemblies combine MCX straight or right-angle plugs with rugged, IP67-rated bulkhead connectors—including SMA, RP-SMA, TNC, RP-TNC, and N-Type—designed to provide secure, sealed connections that protect systems from temporary water and fluid ingress. Optimized for short-distance RF applications, these cable assemblies offer high heat resistance, durability, and low signal loss, making them well-suited for portable IoT devices, drones, GPS/GNSS, Wi-Fi, and demanding industrial, agricultural, and construction environments, with a wide range of standard and custom cable lengths available.
SMA to Unterminated Cable Assemblies Datasheet
Amphenol RF’s SMA to unterminated cable assemblies provide a highly flexible 50-ohm solution designed to support efficient RF system integration and custom termination requirements. Built on a range of flexible and conformable cable types, these assemblies enable engineers to hand-form routing paths and terminate to the connector or interface of their choice, delivering maximum design versatility. The SMA interface ensures a secure, reliable connection with broad compatibility across standard RF equipment, making these assemblies well-suited for demanding applications such as test and measurement, aerospace and prototype development. With multiple standard lengths available and robust construction supporting performance up to 18 GHz, these SMA pigtail assemblies offer a dependable and adaptable solution for high-frequency design environments.
お問い合わせ
以下のフォームにご記入ください。折り返しご連絡いたします。
アスタリスク(*)が付いている項目は必須です。