2.2-5 Connectors

4.3-10
Amphenol RF’s line of 2.2-5 connectors are a compact version of the previously released 4.3-10 connector series, with a 53% smaller footprint. This connector series is lightweight and can accommodate various cable types. The robust design makes these connectors ideal for both indoor and outdoor applications.

The 2.2-5 connector series is designed to meet the needs of applications which require low PIM in order to avoid interference in network quality during high speed data transmission. It offers flexibility in installation with the ability to blind mate.

Features and Benefits
  • 53% smaller than the 4.3-10 series
  • Supports up to 1/2” diameter cable
  • Push-pull and threaded coupling mechanisms available
  • Excellent low PIM performance
Applications
  • Small Cells
  • Mobile Networks
  • Distributed Antenna Systems (DAS)
  • Low Power Base Stations
  • In-Building Architecture
  • MIMO Antennas
  • Test & Measurement

2.2-5 Connectors Specifications

Electrical

Items
Impedance 50 Ohm
Frequency Range DC - 20 GHz
Voltage Rating 500 Volts RMS Continuous
Dielectric Withstanding Voltage 1500 VRMS Min
VSWR  
     Interface  
     DC - 3 GHz 1.025 (-38 dB) Typ
     3 - 6 GHz 1.032 (-36 dB) Typ
     Cable Connector  
     DC - 4 GHz 1.046 (-33 dB) Typ
     4 -6 GHz 1.065 (-30 dB) Typ
Insulation Resistance  3000 MΩ Min
Center Contact Resistance 2 mΩ Max
Outer Contact Resistance 1 mΩ Max
RF Leakage -100 dB Max (DC - 3 GHz)
Insertion Loss .03 √(f(GHz)) dB Max
Passive Intermodulation (PIM) -166 dBc @ 2 X 20W
Power Handling 250 W @ 2 GHz @ 40 ºC

Environmental

Items
Temperature Range -40⁰C to +85⁰C
Thermal Shock IEC 60068-1
Corrosion IEC 60068-1
Vibration IEC 60068-1
Mechanical Shock IEC 60068-1
Interface Sealing IP68 in Mated Condition

Mechanical

Items
Mating Cycles 100 Min
Coupling Mechanism  Threaded
Interface Specification Telegartner T00001A0052
Engagement Force 32 N (7.2 lbs) Typ
Disengagement Force 3.3 N (0.75 lbs) Typ
Mating Torque, Min Working 26 inch-pounds (3 N-m)
Note: These characteristics are typical and may not apply to all connectors.
Connector configurations may affect performance.

Interface Dimensions