HD-AFI CONNECTOR SERIES
The HD-AFI connector series is a solution for board-to-board RF applications, especially for the broadband and wireless marketplaces.
The HD-AFI interface utilizes a proprietary configuration that allows for a very stable RF signal over the full axial range of the connector system. It has generous “float” to compensate for the axial and radial misalignment due to packaging tolerances. This industry-leading float results in a maximum misalignment allowed by the system of 1.32 mm radial and 2 mm axial.
The interface is available as a 75 Ω connector system with a performance of DC to 18 GHz.
Related Products
HD-AFI Bullets
Features and Benefits
- Available as HD-AFI for DC-18 GHz 75 Ohm systems
- Proprietary configuration that allows for industry leading “float”
Applications
- Mil/Aero
- CMTS
- Broadband
- Switch
- Internet
- Routers
- Telecommunications
HD-AFI 75 Ohm Specifications
| Electrical | |
| Impedance | 75 Ohm |
| Frequency Range | DC - 18 GHz |
| VSWR | |
| Straight Connectors 1 GHz | -22 dB |
| RF Leakage | -70 dB |
| Power Handling | 10 W @ 2 GHz |
| Environmental | |
| Temperature Range | -55⁰C to +155⁰C |
| Mechanical | |
| Engagement Force | 6 N Max. |
| Disengagement Force | 1 N Min. |
| Connector Durability (Mating) | 200 mating cycles |
| Axial Misalignment | 2 mm |
| Radial Misalignment | 0.8 mm |
| Minimum PCB Spacing | 12 mm |
These characteristics are typical and may not apply to all connectors.
Interface Dimensions
HD-AFI is an Amphenol RF proprietary interface. Contact us for additional information.
