MINI-BNC CONNECTOR SERIES
The Mini BNC connector series offers the high performance and wide compatibility of the original Amphenol 75 Ω BNCs. However, the Mini-BNC has a higher connector density. Specifically, 40% more interconnects in the same area.
Furthermore, the Mini BNC series expands on the SMB and SMZ system. Mini BNCs provide a positive locking bayonet system whereas SMB and SMZ have no locking feature. In addition, the Mini BNC is specifically designed to be a drop-in replacement and used with the Telco DS3 application.
The Mini BNC is compatible with the present field installer tooling and strip dimensions.
Features and Benefits
- Crimp/Crimp design compatible with Trompeter tooling
- Same standard installation tooling using the best-in-class Telco DSC cable terminations assignment
- Same foot print on the jack side, making the Mini BNC a drop-in replacement for most high-density applications using SMB or SMZ jacks
- 75 Ω allowing room for movement up the frequency chain while matching impedance
- Bayonet locking coupling mechanism
Applications
- Antennas
- Medical Equipment
- Automotive (GPS)
- Computers/LANs
- Mil-Aero
- Base Stations
- Cable Modems
- Instrumentation
- Network Analyzers
- Telecom
Mini-BNC Specifications
Electrical | |
Impedance | 75 Ohms |
Frequency Range | DC-4 GHz (acceptable return loss up to 1 GHz) |
Return Loss | |
DC-750 Hz | 26.4 dB |
DC-1 GHz | 22.6 dB |
VSWR | |
DC-750 Hz | 1.10 max |
DC-1 GHz | 1.16 max |
Insertion Loss Max | 0.10 dB max @ 1 GHz |
Insulation Resistance |
5000 MΩ |
Contact Resistance (center contact) | ≤ 12 mΩ |
Dielectric Withstanding Voltage (Sea Level) | 1000 VRMS |
Voltage Rating (Sea Level) | ≤ 500 V peak (depending on cable) |
Environmental | |
Temperature Range | -45⁰C to +85⁰C |
Thermal Shock | MIL-STD-202, Method 108, cond. D |
Moisture Resistance | EIA-364-31, Method II, cond. C |
Corrosion | MIL-STD-1344, Method 1001, cond. B |
Vibration | MIL-STD-1344, Method 1001 |
Mechanical Shock | MIL-STD-1344, Method 2004, cond. D |
Humidity | MIL-STD-1344, Method 1002, cond. C |
Mechanical | |
Mating | 2 stud bayonet lock coupling |
Attachment Method | |
Inner | Crimp |
Outer | Clamp |
Center Contact Retention Force | ≥ 6 lbs (27 N) |
Cable Affixment (Braid/Jacket) | Hex crimp |
Cable Affixment (Center Contact) | Crimp or solder |
Engagement Force | ≤ 5 lbs (22 N) |
Disengagement Force | ≥ 1.5 lbs (7N) |
Durability (Matings) | 500 cycles min |
These characteristics are typical and may not apply to all connectors.