SMP CONNECTOR SERIES
The SMP interface is a subminiature interface in the same scale as MMCX connectors but offers a frequency range of DC to 40 GHz. It is commonly used in miniaturized high frequency coaxial modules and is offered in both push-on and snap-on mating styles.
The available detent systems, full and limited, provide respective levels of engagement/disengagement forces. This family of interconnects addresses all package design needs. It can be utilized as a highly shielded interconnect for high data rate applications or in a board-to-board system using a floating bullet. This floating bullet provides a link between mated pairs compensating for both radial and axial misalignment.
Available in a cable-to-board mated pair, the plug side can be provided in either right angle or straight with termination capability to either 0.047” or 0.086”, semi-rigid or conformable coax. The receptacles are designed for surface, through hole, or end launch mounting.
Features and Benefits
- RF performance DC to 40 GHz
- Designed to accommodate both radial and axial misalignment
- Push-on and snap-on mating styles for quick installation
|Frequency Range||DC-26.5 GHz extended performance to 40 GHz|
|DC-18 GHz||1.2 max|
|18-26.5 GHz||1.3 max|
|26.5-40 GHz||1.7 max|
|Center Contact||≤6 mΩ|
|Outer Contact||≤2 mΩ|
|Voltage Rating (Sea Level)||≥ 500 VRMS (depending on cable)|
|Insulation Resistance||5000 MΩ min|
|Temperature Range||-65⁰C to +165⁰C|
|Thermal Shock||MIL-STD-202, Method 107, cond. C|
|Vibration||MIL-STD-202, Method 204, cond. B|
|Mechanical Shock||MIL-STD-202, Method 213, cond. B|
|Humidity||MIL-STD-202, Method 106, cond. D|
|Engagment Force||≤ 15.0 lbs (40 N)|
|Disengagment Force||≤0.5 lbs (2N)|
|Durability (Matings)||100 cycles min|